Components, digital
adder
Every option, pin and variant of adder, as release
1.3.1
of the compiler states them.
Pins
adder with its default options, pins named.Pin functions
| Pin | Side |
|---|---|
in1 | left |
in2 | left |
out1 | right |
out2 | right |
A wire names a pin as ID.pin. Rotating the part moves the pins with it; their names stay the same.
Options
Options go in square brackets after the colour, as name=value. Any option not listed here is an error.
Options
| Option | Accepts | Default |
|---|---|---|
type | One of 2 values: half,full | half |
inputs | Whole number from 1 to 32 | 2 3 when type=full |
outputs | Whole number from 1 to 32 | 2 |
orientation | One of 4 values: right,down,left,up | right |
fit | Only wires | None |
fit and orientation cannot be written together.
Variants
Pin names depend on the selected variant. Each drawing labels its own pins.
type=half in1 (left),in2 (left),out1 (right),out2 (right)
type=full in1 (left),in2 (left),in3 (left),out1 (right),out2 (right)
Writing one
adder:U1 at (120, 112) #purple